MotorVac OilClean MOF-1000 - Manual (Page 28)

SECTION 6. ACCIDENTAL RELEASE MEASURES
Spill or leak procedures:
Stop spill at source. Dike area & contain. Clean up remainder with absorbent materials. Mop up
and dispose of.
Waste disposal method:
Recycle or dispose of observing local, state & federal health, safety & pollution laws. If questions
exist, contact the appropriate agencies.
Other precautions:
None.
SECTION 7. HANDLING AND STORAGE
Handling:
Isolate from oxidizers, heat, and open flame. Use only with adequate ventilation. Avoid breathing
of vapor or spray mist. Do not get in eyes, on skin or clothing. Wear OSHA standard goggles or
face shield. Consult safety equipment supplier. Wear gloves, apron and footwear impervious to this
material. Wash clothing before reuse. Avoid free fall of liquid. Ground containers when
transferring. Do not flame cut, braze, or weld. Empty container very hazardous! Continue all label
precautions!
Storage:
Do not store above 49
°C/120°F. Store large amounts in structures made for OSHA Class II liquids.
Keep container tightly closed and upright when not in use to prevent leakage.
SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Exposure controls:
None necessary.
Ventilation:
Local exhaust: Necessary
Mechanical (general): Acceptable
Special: None
Other:
None
Personal protection:
Wear OSHA standard goggles or face shield. Consult safety equipment supplier. Wear gloves,
apron & footwear impervious to this material. Wash clothing before reuse.