DoorKing 1812 Classic - Manual (Page 27)

1812-065-U-12-13 25
2.3.7 Answer Incoming Call - Enable / Disable
Factory setting is 0 (Disable).
The 1812 can be programmed to answer calls placed to the home from an off-site phone line. When this feature is enabled,
the 1812 will pick-up the call after the number of rings programmed in section 2.3.6. This then allows remote programming
or remote relay activation of the system. If this feature is disabled, the 1812 will not answer any call regardless of the
number of rings programmed in 2.3.6.
1. Press * 1 5 and enter the MASTER CODE. [ * 1 5 _ _ _ _ (beep)]
2. Press 0 * to Disable this feature OR press 1 * to Enable this feature. [ _ * (beep)]
3. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.3.6 Answer Incoming Call on X Rings
Factory setting is 12 (12 Rings).
This programming section sets the number of rings that the 1812 will allow to pass through the system before it picks up
the call to allow remote programming or remote relay activation of the system. The number of rings to answer can be set
from 1 to 99 rings and must be entered as a two-digit number.
For example, if you want the 1812 to answer the call after the sixth ring, enter 0 6
* in step 2.
Once the number of rings has been programmed, the system’s “answer incoming call” MUST also be enabled for this to
function (See 2.3.7 below).
Important! If more than one 1812 is connected in the system (2.3.2 set for multiple systems), the ALL 1812s that are
connected directly to the homeowner’s phone must have the “Answer Incoming Call” set for the SAME number of rings
AND more rings than the answering machine’s number of rings.
Answering Machine/Service Note: If the homeowner has an answering machine or answering service on their phone, this
may present a problem. If the answering machine/service is set to answer on the fourth ring, and the 1812 is set to answer
on the 6th ring, the answering machine/service will always pick-up the call before the 1812 does. On the other hand, if the
1812 is set to answer on the fourth ring, and the answer machine/service is set to pick-up the call on the 5th ring, the 1812
will always answer the call unless the answer incoming call is disabled (See 2.3.7 below).
1. Press * 1 8 and enter the MASTER CODE. [ * 1 8 _ _ _ _ (beep)]
2. Enter the number of rings (01-99), then press * . [ _ _ * (beep)]
3. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
4th 1812
6 Rings
Homeowner’s
Phone
1st 1812
6 Rings
2nd 1812
6 Rings
3rd 1812
6 Rings
Answering:
Machine/
Service
4 Rings
Examples:
77 88 99
44 55 66
1 2 3
00
1111 2222 333333 Push Button Push Button
To Call To Call
Single 1812
5 Rings
Multiple Systems
Homeowner’s
Phone
Answering:
Machine/
Service
4 Rings
Central
Office
Line
Central
Office
Line
77 88 99
44 55 66
1 2 3
00
1111 2222 333333 Push Button Push Button
To Call To Call
77 88 99
44 55 66
00
Push Button Push Button
To Call To Call
77 88 99
44 55 66
00
Push Button Push Button
To Call To Call
77 88 99
44 55 66
00
Push Button Push Button
To Call To Call