6 call forward time zone - enable / disable, 7 do not disturb - enable / disable, 8 access code time zone - enable / disable – DoorKing 1812 Classic User Manual

Page 36

Advertising
background image

1812-065-U-12-13

34

4.6 Call Forward Time Zone - Enable / Disable

To use the call forward time zone feature, be sure that a call forward time zone has been programmed into the system
(2.4.5), call forward phone number is programmed (2.5.1) and that the call forward is disabled (2.5.2). This will cause the
1812 to check the time zone before forwarding any calls to the forward phone number.

1. Pick up homeowner's telephone and press

*

7. [

*

7 (beep)]

2. Press

*

3 7 and enter the MASTER CODE. [

*

3 7 _ _ _ _ (beep)]

3. Press 1

*

to enable call forward time zone, OR press 0

*

to disable call forward time zone. [ _

*

(beep)]

4. Hang up.

4.7 Do Not Disturb - Enable / Disable

To use the Do Not Disturb feature, be sure that a do not disturb time zone has been programmed into the system memory
(2.4.2). When the do not disturb feature is enabled and it’s time zone is active, the 1812 will not allow calls to the house or
allow calls to be forwarded to the house, regardless of whether the call forward feature is enabled or disabled.

1. Pick up homeowner's telephone and press

*

7. [

*

7 (beep)]

2. Press

*

3 4 and enter the MASTER CODE. [

*

3 4 _ _ _ _ (beep)]

3. Press 1

*

to enable do not disturb time zone, OR press 0

*

to disable do not disturb time zone. [ _

*

(beep)]

4. Hang up.

4.8 Access Code Time Zone - Enable / Disable

The access code time zone affects only those access codes programmed under the “time zone” access code “location
codes” 21-25 for relay 1, 46-50 for relay 2. To use this feature, be sure that four-digit access codes have been programmed
into the system under the desired location codes, and be sure that an access code time zone has been programmed (2.4.4).

1. Pick up homeowner's telephone and press

*

7. [

*

7 (beep)]

2. Press

*

3 6 and enter the MASTER CODE. [

*

3 6 _ _ _ _ (beep)]

3. Press 1

*

to enable access code time zone, OR press 0

*

to disable access code time zone. [ _

*

(beep)]

4. Hang up.

4.10 Answer Incoming Call -

Enable

/ Disable Only from Phone

The auto answer feature must be enabled to allow relay activation and programming of the system from a remote location.
When the homeowners phone number is called, the 1812 will pick up the call after the programmed number of rings
(2.3.6).
Note: You can only disable this feature from the homeowner's phone. It can only be enabled from the system keypad.

1. Pick up homeowner's telephone and press

*

7. [

*

7 (beep)]

2. Press

*

1 5 and enter the MASTER CODE. [

*

1 5 _ _ _ _ (beep)]

3. Press 1

*

to enable incoming call, OR press 0

*

to disable incoming call. [ _

*

(beep)]

4. Hang up.

4.9 Auto Relay Activation Time Zones - Enable / Disable

The four automatic relay activation time zones can be enabled or disabled as required. Time zones one and two operate
relay 1, while time zones three and four operate relay 2. To use this feature, be sure that the automatic relay activation time
zones have been programmed (2.4.3).

1. Pick up homeowner's telephone and press

*

7. [

*

7 (beep)]

2. Press

*

3 5 and enter the MASTER CODE. [

*

3 5 _ _ _ _ (beep)]

3. Enter the automatic relay activation time zone number (1-4), then press

*

. [ _

*

(beep)]

4. Press 1

*

to enable relay activation time zone, OR press 0

*

to disable relay activation time zone. [ _

*

(beep)]

5. Hang up.

Advertising