3 scheduled do not disturb on / off, 4 setting do not disturb schedule – DoorKing 1816 Intercom System-Multi User Manual

Page 35

Advertising
background image

3.5.3 Scheduled Do Not Disturb On / Off

This programming sequence is used by the doorman or system administrator to turn the
preprogrammed do not disturb schedule on or off.

Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.

Factory Default = 0 (Off)

1. Take the doorman telephone off hook.

2. Press *22 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the four-digit relay number of the resident that the schedule is being administered

on for _ _ _ _ then press * (beep). Note: entering 9 9 9 9 in this step will turn the
schedule on for all residents.

4. Enter 0 to turn the schedule Off, or enter 1 to turn the schedule On, then press * (beep).

5. Hang up the doorman telephone to end the programming session.

3.5.4 Setting Do Not Disturb Schedule

This programming sequence is used by the doorman or system administrator to set a do not disturb
schedule for residents.

Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.

Factory Default = 12:00 AM to 6:00 AM Sunday through Saturday

1. Take the doorman telephone off hook.

2. Press *23 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the four-digit relay number of the resident that the schedule is being set for _ _ _ _

then press * (beep). Note: entering 9 9 9 9 in this step will set the schedule on for all
residents.

4. Enter the beginning time in hours and minutes (HHMM) _ _ _ _ then press * (beep).

5. Enter 0 for AM, or 1 for PM _ then press * (beep).

6. Enter the ending time in hours and minutes (HHMM) _ _ _ _ then press * (beep).

7. Enter 0 for AM, or 1 for PM _ then press * (beep).

8. Enter the days of the week that the schedule will be active (Sunday = 1; Saturday = 7)

then press * (beep). Note: you can enter from 1 – 7 digits in this step. For example, if
the schedule is set for Monday, Wednesday and Friday, enter 2 4 6.

9. Repeat steps 3-8 to program another resident.

10. Hang up the doorman telephone to end the programming session.

1816-065-K-12-11

Page

35

Advertising