Avaya Media Gateway G350 - Manual (Page 104)

Chapter 7
94 Avaya G350 Manager User Guide
LMI Auto Sense The state of Local Management Interface
Auto-Sensing on the interface. Possible states
include:
• Enable - The LMI type is received from
the interface at the other end of the line.
• Disable - The LMI Type is determined by
the value in the LMI Type field.
Admin Status The administrative status of the frame relay
interface. Possible values are:
• Enabled
• Disabled
Oper Status The operational status of the interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
MTU (octets) The size (in octets) of the largest datagram
that can be sent via the interface.
Table 7-11. USP Dialog Box - Frame Relay Parameters (Continued)
Field Description