Avaya Media Gateway G350 - Manual (Page 177)

Avaya G350 Manager User Guide 167
IP Route
You can create, modify, or delete Routing Table static entries. For more
information on editing tables, refer to
“Editing Tables” on page 157 .
* Note: Only static entries in the Routing Table can be modified.
Entries learned from OSPF, RIP, or local cannot be modified.
Protocol The protocol through which the route was
learned. The following protocols can be
specified:
• Static - The route was manually configured
to this device.
• Local - The route represents a directly
attached net/subnet and corresponds to
one of the IP interfaces configured to this
device.
• RIP - The entry was learned from the RIP
protocol.
• OSPF - The entry was learned from the
OSPF protocol.
Redistribute If checked, static entries are advertised by RIP
and OSPF. If unchecked, static entries are not
advertised.
Cost Number of hops to the destination network, or
the cost of the route for OSPF routes.
Permanent The permanence status of the route. Possible
statuses are:
• Checked - The route is not disabled when
a link on the route is down.
• Unchecked - The route is disabled when a
link on the route is down.
Static Preference The preference of this route. Possible values are:
• low - Dynamic routes are preferred on this
static route.
• high - This static route is preferred on
dynamic routes.
Route Type The type of route, either local or remote.
Route Age The number of seconds since the route was last
updated.
Table 16-3. Routing Table Parameters (Continued)
Field Description