Avaya Media Gateway G350 - Manual (Page 68)

Chapter 7
58 Avaya G350 Manager User Guide
Linecode The type of linecode. Possible values are:
For an E1 line:
• HDB3
• AMI
For a T1 line:
• B8ZS
• AMI
Cablelength (T1
only)
The recommended maximum cable length.
Gain (T1 only) The gain on this interface.
Clock Source The source of the Transmit Clock. Possible
sources include:
• Line - The recovered receive clock is used
as the transmit clock.
• Internal - The local clock is used as the
transmit clock.
FDL (T1 only) The type of FDL used on this interface. Possible
types include:
• ANSI
• AT&T
• Both - ANSI and AT&T FDl are both used
on this interface.
Local Loopback A request to use a local loopback. A local
loopback can be performed using:
• No Loopback
• Payload Loopback
• Line Loopback
• Diag Loopback
Remote Loopback
(T1 only)
A request to use a remote loopback. A remote
loopback can be performed using:
• No Remote Loopback
• Remote Line
• Remote Payload
Table 7-1. E1/T1 Port Configuration Parameters (Continued)
Field Description