Avaya Media Gateway G350 User Manual
Page 183
Avaya G350 Manager User Guide
173
IP Route
You can create, modify, or delete DHCP/BOOTP parameters. For more
information on editing tables, refer to
.
Relay Mode
The method by which the DHCP relay chooses
an IP address to include in the DHCP request.
When relaying a DHCP/BOOTP request, the
relay has to write its own IP address into the
relayed DHCP request. This address is used by
the DHCP server to determine the subnet from
which the client’s IP address has been allocated.
When the router has multiple IP addresses on
the same VLAN, any of these addresses can be
used when relaying DHCP requests.
The
Mode
field controls the behavior of the
DHCP relay in choosing the IP address to write
into the DHCP request. Possible modes are:
•
Default
- The router chooses one of the
addresses itself. The address chosen will be
the lowest IP address on that VLAN.
•
Specific
- The router is configured with a
single IP address to be used with all relayed
requests arriving on the VLAN. This
address must be one of the router’s IP
addresses on the specified VLAN. It must
be entered in the
Relay Address
field.
Relay Address
One of the router’s IP addresses on the VLAN.
This is used for all relayed requests, if
Mode
is set
to
Specific
.
Table 16-6. DHCP/BOOTP Parameters (Continued)
Field
Description