Avaya Media Gateway G350 - Manual (Page 187)

Avaya G350 Manager User Guide 177
IP Route
* Note: In the Send field, selecting ‘ listen-only ’ or ‘ talk-listen ’ will
prevent updating the Default Route Metric field.
You can modify RIP interfaces. For more information on editing tables,
refer to
“Editing Tables” on page 157 .
Cost The cost of using this interface. RIP chooses the
route with the lowest total cost (metric) for
each destination.
Default Route Metric The metric of the default route entry in RIP
updates originated on this interface, if
configured to
SendDefaultOnly .
Default Route Mode If talk-listen , accepts default route entries in RIP
messages received from other routes on this
interface. If
talk-only , does not accept default
route entries in RIP messages received from
other routes on this interface.
Split Horizon The method for handling routes learned from
this interface, when sending updates to this
interface. Possible methods are:
• Poisoned Reverse - The routes are
advertised to this interface as unreachable.
• Split Horizon - The routes are not
advertised to this interface at all.
• None - The routes are advertised to this
interface as is.
Auth Type Authentication Type. Possible methods are:
• None
• Simple
Auth Key The password for this interface. This is only
used if the
Auth Type is set to Simple-password .
The password may contain up to 16 characters.
It may be configured here, but not viewed.
Table 16-8. RIP Interface Parameters (Continued)
Field Description