Avaya Media Gateway G350 - Manual (Page 180)

Chapter 16
170 Avaya G350 Manager User Guide
You can create or delete ARP table entries. For more information on
editing tables, refer to
“Editing Tables” on page 157 .
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
1. Click .
Or
Select Action > Start Point . The Start Point dialog box opens.
Figure 16-6. ARP Table Start Point Dialog Box
2. Enter an IP address in the IP Address field.
3. Select an interface from the If Name listbox.
4. Click OK . The ARP Table displays entries starting with the specified
IP address and interface.
To view all the entries in the ARP Table:
Click .
Or
Select View > Refresh . All entries appear in the table.
Status The status of the interface. Possible status values
are:
• Dynamic - The entry is learned from the
ARP protocol. If the station entry is not
active for a predetermined time, the entry
is deleted from the table.
• Static - The entry has been configured by
the network management station and is
permanent.
• Invalid - The entry in the table is invalid.
Table 16-4. ARP Parameters (Continued)
Field Description