Nova-Tech IHS 2a - Manual (Page 5)

3.2 DISPLAY / KEYBOARD FUNCTION
The display and keypad have a number of features the key information is shown
below:
KEYS PRIMARY FUNCTION SECONDARY FUNCTION
[On/Off] To turn the balance On or Off. ‐‐‐‐
[Tare]
Tares the balance and shows the net
weight value. Pressing the [Tare] again
will reset another tare value A secondary function of "Enter" key is
for setting parameters or other
functions.
[%] Enters the percentage weighing
function.
When in percentage mode, press [%]
key to return to normal weighing
mode. When setting some parameters
this key will move the flashing digit to
the right.
[Smpl] Use this key to enter parts counting
mode from the normal weighing
mode. When in parts counting pressing the
[Smpl] will return to weighing mode.
Clears the accumulated value from the
memory when pressed during the total.
When setting some parameters this key
will move the flashing digit to the left.
[Mode] Pressing this key will cycle through the
weighing units which are enabled. Displays the unit weight, total weight
and the count when in the parts
counting mode.
Setting parameters it will show the
next option or increase the value of a
flashing digit.
[Print] To print the results to a PC or printer
using RS‐232 or USB interface. It also
adds the value to the accumulated
memory if the accumulation function
is not automatic. Secondary function is to return to
normal operation when the balance is
in a parameter setting mode.
Setting parameters it will show the
previous option or decrease the value
of a flashing digit.
5 | P a g e © Adam Equipment Company 2008