Nova-Tech 2700 Series Benchtop Meters - Manual (Page 9)

5
3. System Setup & Configuration
Use the System Setup to customize operation of your 2700 series meter.
Press
from the measurement screen and then press ENTER when
SYSTEM is highlighted to access these settings.
The following settings can be customized for each model:
STABILITY PRINT SET
STABILITY
CRITERIA
DATE & TIME
AUTO READ PASSWORD
BACKLIGHT CLEAR DATALOG
DATALOG FACTORY RESET
PRINT SETUP CONTRAST
PRINT FORMAT
Stability
To aid with measurement and calibration, your meter has a unique feature that
provides an obvious visual indication when the reading becomes stable. If the
Stability feature is enabled, the digits on the primary reading will be faded when
unstable, becoming solid when stable. If this feature is disabled, the primary
reading will always be solid. The image below on the left is an unstable reading
during pH Measurement mode with Stability enabled. The image on the right
shows a stable reading.