Pach and Company AeGIS 7000P Series Manual - Manual (Page 22)

AeGIS 7000P Page 22
G. How to use the 4-digit access code to open
the door 1. Press , the welcome screen will stop
scrolling otherwise repeat this step.
2. Press 4-digit valid access code.
H. How to increase or decrease the display’s
intensity
1. Locate the display intensity adjustment see
figure 2.1, p11
2. Turn
counter clockwise to increase or
clockwise to decrease
I. How to increase or decrease the speaker’s
volume
1. Locate the speaker’s volume adjustment see
figure 2.1, p11
2. Turn
counter-clockwise to increase or
clockwise to decrease
J. How to check the total tenant’s directory in
the system
Use Function code 91, see chapter 3, p20
K. How to check my system model number Use Function code 46, see chapter 3, p18
WARNING: SYSTEM WILL BE
DISABLED FOR 90 SECONDS IF INVALID
ACCESS CODE HAS BEEN ENTERED
ACCORDING TO THE SETTING OF LOCK‐OUT
COUNT (FUNCTION CODE 72, p19)