Pach and Company AeGIS 7000P Series Manual - Manual (Page 4)

AeGIS 7000P Page 4
Chapter 1
GETTING STARTED
Introduction
Pach & Company thanks and congratulates you on the purchase of your AeGIS 7000P Series Telephone Entry
Access Control Systems.
The manual is designed to guide you through the proper programming and use of the AeGIS 7000P Series. It
is important for you to read and follow the manual completely.
The Aegis 7000P Series comes with two years warranty.
System Description, Specifications and Accessories
AeGIS 7000P Series utilizes microprocessor technology to provide security as well as convenience to you. It is
designed for residential and commercial buildings, military and government sites, industrial facilities, or any
location where access control is required. It uses a dedicated phone line and connects to the public telephone
network. Authorization for access control is through the telephone line, or with the tenant's own access code,
which is entered on the system keypad. The tenants MUST have a telephone to allow remote visitor access.
Also, as a standard feature, the tenant is allowed to "call" the Aegis unit and converse with the visitor using a
touch tone phone.
The system parameters and tenants data will be entered via the keypad and the LCD provides easy display.
Non-volatile technology is used for AeGIS 7000P series. The tenant database will not be lost during a power
failure.
Standard features:
o Program and store the tenant's name, directory code, telephone number and personal access
code.
o Unlocking door or gate remotely by the tenant using his or her telephone keypad.
o Unlocking door or gate by the tenant using his or her own private access code.
o Built-in back-light LCD directory, Postal Switch.
o Works behind a PBX to dial extensions (analog only).
o Keypad Activated to support Voice Mail.
Programmable features
o 2, 3 or 4 digit directory code
o Lock out count
o Manual Unlock-Auto, count-down timer re-lock.
o 4-digit unit master code protection
o Open Interval
o Talk Time timer