Connecting pasport sensors – PASCO PS-2010 AirLink2 User Manual
Page 10
Advertising
![background image](/manuals/340603/10/background.png)
®
P A SP O R T A ir L i n k
2
C o n n e c t in g P A S P O R T S e n s o r s
10
Connecting PASPORT Sensors
The DataStudio software and the SPARKvue app for iPhone and iPod touch automatically recognize a PASPORT sensor when it is
plugged into the PASPORT AirLink
2
. The program or app will set the calibration(s) and sampling rate to the sensor’s defaults.
Plugging in a Sensor
Align the alignment bar on the end of the PASPORT AirLink
2
with the groove on the sensor or sensor
plug. Plug the sensor or sensor plug into the mini DIN sensor connector on the end of the sensor inter-
face.
Advertising