PASCO PS-2010 AirLink2 User Manual
Page 8
![background image](/manuals/340603/8/background.png)
®
P A SP O R T A ir L i n k
2
P a r t T w o : U s in g t h e P A S P O R T A i r L in k
2
w i t h a C o m p u t e r
8
•
The Add Bluetooth Device Wizard shows the available Bluetooth devices..
Select the AirLink
2
from the list of Bluetooth devices and click ‘Next’.
•
When the Device Wizard asks for a passkey, check “Let me choose my own
passkey”, click “Next”, and enter 1234 Once again, click “Next”.
•
When the ‘Add Bluetooth Device Wizard’ is finished, make a note of the Out-
going COM port number for the AirLink
2
shown in the Add Bluetooth Device
Wizard. You will need to enter the Outgoing COM port number in the Data-
Studio ‘Choose Interface’ dialog (see below). Click “Finish”.
Select the AirLink
2
Select
this
choice
Make a note of the
Outgoing COM port.
Enter 1234 as the passkey