PASCO ME-8598 Venturi Apparatus - Manual (Page 15)

®
M o d e l N o . M E- 8 5 9 8 T e c h n ic a l Su p p o r t
15
POLYSI TECHNOLOGIES, INC. Issued 4/7/95
5108 REX MCLEOD DR. Revision 3 4/1/2005
SANFORD, NC 27330
Phone:
(919) 775-4989
Material Safety Data Sheet Page 1 of 2
I. Product
Product Name:
Barium Grease
Product Type: Petroleum Grease
II. OSHA Components
CAS #
WT % Range Component
64742-52-5 70-75 Petroleum Nephthenic Oil
68201-19-4 25-30 Barium Soap- Insoluble
III. Effects of Overexposure
Eyes:
Contact with eyes may cause redness. Flush eyes with copious amounts of water for 15.
minutes. If irritation persists contact a physician.
Skin: Contact with skin causes a slight irritation. Wash contacted areas with soap and water.
Ingestion: If ingested drink 2 glasses of water, seek prompt medical attention and Induce vomiting.
IV. Protective Equipment For Handling
Eyes:
Safety Goggles or Glasses
Skin: Gloves
Ventilation: Not Required
V. Handling and Storage
Handling:
No special requirements
Storage: Normal storage
VI. Transport Information
Class or Type:
DOT and IATA: Non-Hazardous
VII. Spill and Disposal Procedures
Cleaning up Spills:
Use absorbent material to collect and contain material for disposal
Recommendation of Disposal Dispose in accordance with Federal, State and Local regulations
VIII. Reactivity Data
Stability: Stable
Hazardous Polymerization:
Will Not Occur
Incompatibilities: Strong oxidizing materials
Hazardous Decomposition: Carbon Monoxide and various hydrocarbons