PASCO EM-8622 BASIC ELECTRICITY User Manual

Page 28

Advertising
background image

Basic Electricity

012-04367E

24

⑧

Replace the 100-µF capacitor with a 330-µF capacitor. Repeat step 7, recording the charging and
discharging times in Table 8.1. If a third value is available, include it in the data table, too.

⑨

Return to the original 100-µF capacitor, but put a 220-K

Ω

resistor in the circuit. Repeat step 7,

recording your data in Table 8.1. If a third resistor is provided, use it in the circuit, recording the
data.

➤ NOTE:

➀

What is the effect on charging and discharging times if the capacitance is increased? What
mathematical relationship exists between your times and the capacitance?

➁

What is the effect on charging and discharging times if the resistance of the circuit is increased?
What mathematical relationship exists between your times and the resistance?

➉

Return to the original 100-K

Ω

resistor, but use the 100-µF capacitor in series with the 330-µF

capacitor. Repeat step 7, recording your results in Table 8.2.

11

Now repeat step 7, but with the 100-µF and the 330-µF capacitors in parallel.

R = __________ C

1

= __________C

2

= __________

➤ NOTE: What is the effect on the total capacitance if capacitors are combined in series? What if

they are combined in parallel? (Refer to Table 8.2).

Trial

Resistance

Capacitance

1

2

3

4

5

6

7

8

t

C

t

D

Table 8.1

Table 8.2

Type of Circuit

Series

Parallel

t

C

t

D

Advertising