Dispensing hot water, Preparing milk froth, Maintenance and daily cleaning – Bosch TES50159DE VeroCafe Kaffeevollautomat schwarz User Manual

Page 33

Advertising
background image

29

TES501.. | 02/2014

en

Dispensing hot water

¡

Risk of burns!

The milk frother (6) gets very hot. Hold the

milk frother (6) by the plastic part only.

The milk frother must be cleaned before

drawing hot water.

The appliance must be ready for use.

1. Place a pre­heated cup or glass under

the milk frother outlet (6).

2. Pull out the milk frother (6) to open it.

The appliance heats up. Hot water runs

out of the milk frother outlet (6) for about

40 seconds.

3. Stop the process by pushing in the milk

frother (6).

Preparing milk froth

¡

Risk of burns!

The milk frother (6) gets very hot. Hold the

milk frother (6) by the plastic part only.

Tip: You can froth the milk first and then

dispense coffee, or froth the milk separately

and pour it onto the coffee.

The appliance must be ready for use.

1. Press button

B

(11).

Button

B

flashes and the appli­

ance now heats up for approximately

20 seconds.

2. As soon as button and LED

F

lights

up, immerse the milk frother so that it

reaches the bottom of a cup or glass

that is one­third filled with milk.

3. Pull out the milk frother (6) to open it.

¡

Risk of burns!

Escaping steam is very hot and may cause

liquids to sputter. Do not touch the metal

sleeve or aim it at anyone.

4. Froth the milk.

5. Push the milk frother (6) in to close it.

Tip: For optimal milk froth, if possible use

cold milk with a fat content of at least 1.5 %.

Important: Dried milk residue is difficult

to remove, so the milk frother (6)

must be

cleaned with lukewarm water immediately

after use.

Maintenance and

daily cleaning

¡

Risk of electric shock!

Unplug the appliance before cleaning it.

Never immerse the appliance in water.

Do not use a steam cleaner.

● Wipe the housing with a soft, damp cloth.

● Do not use abrasive cloths or cleaning

agents.

● Always remove any traces of limescale,

coffee, milk and descaler immediately.

Such residue can cause corrosion.

● New sponge cloths may contain salts.

Salts can cause rust film on stainless

steel and must therefore be washed out

thoroughly before use.

● Pull the drip tray (8c) with the coffee

grounds container (8b) forwards and out.

Remove the panel (8a) and grate (8d).

Empty and clean the drip tray and coffee

grounds container.

● Remove the drawer (4) and clean.

Advertising