Teledyne 6750 - Total Organic Carbon analyzers - Manual (Page 65)

Total Organic Carbon Analyzer Maintenance
Teledyne Analytical Instruments 53
5.3.3 Master Interface Board (P/N ST13042-1).
The Master Interface Board has no field adjustment. If
malfunctioning, replace the module P/N ST13042-1 using the
instructions below. See Figure 5-5.
Figure 5-5: Removing the Master Interface Board
To Remove the PC Board:
1. Turn off power.
2. Remove plastic cover.
3. Disconnect connectors.
4. Remove panel.
Note: Depending on the configuration, there may be one or two
master interface boards.