FEC AFC1200 - Manual (Page 32)

)(& ,QF
4.9.3 Ribbon Cable Connections
FIG. 4-9-3 Main Unit to Axis Unit Ribbon Cable Connection
Ribbon cables function as a communication bus between the Axis Units and the Main Unit.
One cable is connected from the upper right hand side of the Main Controller Unit to the
bottom of the nearest mounted Axis Controller Unit. All Axis Units are then connected
(daisy-chained) with ribbon cables as shown in Figure 4-9-3. The connectors are keyed with
an arrow to aid in identifying orientation.
Chapter 4: System Setup and Wiring User Console Version A3.53
Page 4-32