FEC AFC1200 User Manual
Page 5
)(& ,QF
4.3
Unit Arrangement
FIG. 4-3 Unit Arrangement
Figure 4-3 provides a reference for the layout of the AFC1200 System components. The
Units may be mounted in any desired configuration as long as the minimum spacing
requirements not neglected. Maximum cable length for the communication bus ribbon cable
is 48 inches. When installing duct above and below the Units, ensure that adequate space is
provided to allow for removal and installation of the Units without removal of the mounting
screws. The components of the AFC1200 System are designed with slotted mounting holes
for easy mounting to the back panel of the enclosure using standard 8-32 screws. The Unit
mounting brackets may be reconfigured to provide for swing door mounting.
Chapter 4: System Setup and Wiring
User Console Version A3.53
Page 4-5