FEC AFC1200 User Manual
Page 9
)(& ,QF
4.6
Power Requirements and Connections
WARNING:
Follow Lockout/Tagout and other safety precautions when connecting and/or
disconnecting cabling, wiring, and equipment.
4.6.1 Monitor (VGA CRT) Power Requirements and Connections
110/230VAC AUTOSENSE 50/60Hz
3
110/230VAC AUTOSENSE 50/60Hz
2
FRAME GROUND
1
CAUTION:
VOLTAGE MAY VARY
DEPENDENT UPON WHICH CRT
MODEL IS USED WITH THE SYSTEM.
REFER TO THE MONITOR OWNER'S
MANUAL FOR SPECIFICATIONS.
DESCRIPTION
PIN NUMBER
FIG. 4-6-1 CRT Power Connector
4.6.2 Main Unit Power Requirements and Connections
200~230VAC + 10%, 50/60Hz, Single Phase
3
200~230VAC + 10%, 50/60Hz, Single Phase
2
FRAME GROUND
1
DESCRIPTION
PIN NUMBER
FIG. 4-6-2 Main Unit Power Connector
Chapter 4: System Setup and Wiring
User Console Version A3.53
Page 4-9