Fairbanks NexWeigh - Manual (Page 26)

Section 4: Programming Configuration
04/14 26 51216 -- Rev. 6
4.5.2. Configuration Menu, Continued
UnitS:
Programming the scale units: The display will indicate UnitS , and the
current setting by displaying a lit LED symbol next to the printed unit legend beside
the display. Press
OVER/UNDER/NEXT , UNITS or TARE to scroll through all
the possible choices. Press PROGRAM/ENTER to enter the selection. Available
selections are:
lb/oz/kg/g lb/oz/kg lb/oz/g lb/oz
lb/kg/g lb/kg lb/g lb
oz/kg/g oz/kg oz/g oz
kg/g kg g
NOTES:
The lb-oz and custom unit settings cannot be used as the Primary Unit in
the NEXWEIGH.
The lb-oz and custom unit settings are not legal for trade.
P-Unit:
Programming the primary unit: (the unit that the instrument will default to
upon power up) The display will indicate P-Unit and indicate the current setting by
displaying the lit LED next to the printed unit legend beside the display. Press
OVER/UNDER/NEXT , UNITS or TARE while observing the LED which will
change to indicate the selection. Press PROGRAM/ENTER to enter the selection.
Available selections are:
lb g kg oz
NOTE: Selection availability is dependent upon the programmed UnitS selection.
LboZ:
pounds-ounces mode: The display will indicate LboZ and the current
selection, either Y for enable or N for disable. Press OVER/UNDER/NEXT ,
UNITS or TARE to change the selection. Press PROGRAM/ENTER to enter
the selection.