Fairbanks NexWeigh - Manual (Page 56)

Section 5: Serial I/O
04/14 56 51216 -- Rev. 6
5.4.8. NexWeigh Serial Commands and Definitions,
Continued
vv) Set 4 to 20 ma
Definition: Used to set the 4-20 ma Analog IO parameters
Command: ‘s42’ ‘param’ ‘value’
Options: ENA = enable front panel setup (y/n)
NET = track net wt. (y/n)
HI = hi weight setting (decimal wt.)
LO = low weight setting (decimal wt.)
Sample Commands: "s42 HI 100.0\r"
"s42 ENA Y\r"
"s42 NET Y\r"
"s42 LO 2.20462\r"
ww) Save Nonvolatile Data
Definition: Used to commit parameters to NV storage,
Command: ‘SND’
Options: None
Sample Command: "SND \r"