Assigning an ip address and network class – Fairbanks NexWeigh User Manual
Page 58
Advertising
Section 5: Serial I/O
04/14
58
51216 -- Rev. 6
5.5.4. Assigning an IP Address and Network Class
1. Click the
Start
button on the Task Bar and select
[ALL] Programs
Lantronix DeviceInstaller DeviceInstaller
.
2. Click the
IP Icon
.
─ The Device Identification
window displays.
3. Enter the
Hardware
Address
of
the device.
─ The address is on the label on
the underside of the Ethernet
accessory module.
4. Select
Assign a specific IP
address to assign a static IP
address to the device, or select
Click
Next
.
Advertising