Finish Thompson KC11 Series - Self Priming Option - Manual (Page 4)

WARRANTY
Finish Thompson, Inc (manufacturer) warrants this prod-
uct to be free of defects in materials and workmanship for
a period of 180 days from date of purchase by original
purchaser. If a warranted defect, which is determined by
manufacturer’s inspection, occurs within this period, it will
be repaired or replaced at the manufacturer’s option, pro-
vided (1) the product is submitted with proof of purchase
date and (2) transportation charges are prepaid to the
manufacturer. Liability under this warranty is expressly
limited to repairing or replacing the product of parts thereof
and is in lieu of any other warranties, either expressed or
implied. This warranty does apply only to normal wear of
the product or components. This warranty does not apply
to products or parts broken due to, in whole or in part,
accident, overload, abuse, chemical attack, tampering,
or alteration. The manufacturer accepts no responsibility
for product damage or personal injuries sustained when
the product is modified in any way. If this warranty does
not apply, the purchaser shall bear all cost for labor, ma-
terial and transportation.
Manufacturer shall not be liable for incidental or conse-
quential damages including, but not limited to process
down time, transportation costs, costs associated with
replacement or substitution products, labor costs, prod-
uct installation or removal costs, or loss of profit. In any
and all events, manufacturer’s liability shall not exceed
the purchase price of the product and/or accessories.
Call our toll free Technical Service Hot Line, 1-800-
888-3743, if you have any questions regarding prod-
uct operation or repair.
ORDERING SPARE PARTS
Spare parts can be ordered from your local distributor.
Always refer to the pump model number to avoid error.
OTHER FTI PRODUCTS
Drum Transfer Pumps, available in sanitary construc-
tion, stainless steel, polypropylene, PVDF, and CPVC,
are capable of flows to 40 gpm, discharge head to 80
feet and viscosities to 100,000+ cps.
Portable Mixers for turbine mixing and blending handle
viscosities to 1,000 cps with gentle, non-vortexing circu-
lation. Available in 316 stainless steel.
Centrifugal Pumps, in polypropylene, PVDF, 316 stain-
less steel, and cast iron are offered in mag drive sealless
or mechanical seal models. Pumps are capable of 330
gpm, up to 325 feet discharge head, and 220
o F (104 o C)
maximum.
For more information, contact Finish Thompson Inc. or
your local distributor.
Toll Free Service 800-888-3743
Part Number J103057-1, Rev. 4
FT00-779B,
6/22/06
4