Finish Thompson EFV - Manual (Page 3)

Introduction
This manual pertains to the EF Series drum pumps. Finish Thompson Inc. thanks you for choosing our products. We
believe the use of our products will be fully satisfactory. When properly installed and operated, your Finish Thompson
motor and pump will provide long, trouble-free service; therefore, please read this manual carefully before carrying
out any operations on the pump/motor unit. Any use other than that described herein is considered incorrect; and,
consequently, Finish Thompson Inc. shall not be held responsible for any damages to people or property. In case of
doubt or enquiries, please reply to our Technical Service department directly at the following address:
Finish Thompson, Inc.
921 Greengarden Rd.
Erie, PA 16501 U.S.A.
Tel. 1-814-455-4478; Fax 1-814-455-8518
www.finishthompson.com; [email protected]
Index
Introduction/ Pump Specifications ................................................................................1
Warranty, General Terms & Conditions ..........................................................................2
Safety ...........................................................................................................................3
Specifications & Dimensions ........................................................................................4
Disassembly .................................................................................................................5-6
Reassembly ..................................................................................................................6-7
Exploded Views – EFP/EFV/EFS Pump Tubes .................................................................8-9
Pump Tube Spare Parts List ..........................................................................................10-11
Note: Repair instructions can be downloaded from our web site at www.finishthompson.com or contact
Technical Service at 1-800-888-3743.
1