General Tools and Instruments LTH8809DL - Manual (Page 12)

-Press "SET" to enter real time setting,
"rtC" "P6" show on the screen . It is
important to input your local time
before you running the logger function.
Wrong time setting will cause you fail
to get correct logging data.
Year set:
'yEr' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
Month set:
' ' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
Date set:
'dAt' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
Hour set:
'Hor' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
Minute set:
' ' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
Second set:
'SEc' displays on the top( 8809/07) or
middle (8808/06) of the monitor.
- Press "Up" or " Down" to adjust the
setting value. Press "SET" to save
the real time setting. Repeat above
steps to finish the whole setting.
-Press " MODE" to return to main menu
if you don't want to save the real time
setting.
Real Time Setting
H:M:S 8808
11