Pc-hp shortcut buttons, Zero, Display menu – Gentec-EO HP User Manual
Page 14: Fig. 2-4 pc-hp shortcut buttons, Fig. 2-5 pc-hp display menu
Version 2.2
10
HP Series Instruction Manual
Gentec Electro-Optics Inc. All rights reserved
2.2.2 PC-HP Shortcut Buttons
To access certain features with a single click instead of having to enter the menus, PC-HP has 8
shortcut buttons on its main window. From left to right, those buttons access: Zero Offset,
Display - Histogram, Display - Tuning Needle, Display - Statistics, Display - Status, Settings -
Data Sampling, Ctrl - Communication - Connect, Ctrl - Communication-Disconnect.
FIG. 2-4 PC-HP SHORTCUT BUTTONS
2.2.2.1
Zero
This feature resets the zero reading level to compensate for electronic offsets in the HP and
thermal noise in the environment of the detector. When the HP receives the associated
command, it subtracts the power reading on all its internal hardware scales. Subsequent
measurements will be relative to this zero power level. Use this function once your power meter
has achieved thermal equilibrium to ensure accurate measurements.
For instructions on the proper way to adjust the offset to zero your detector see section 2,
Operatings Instructions.
2.2.3 Display menu
FIG. 2-5 PC-HP DISPLAY MENU