Gentec-EO HP - Manual (Page 22)

Version 2.2
18
HP Series Instruction Manual Gentec Electro-Optics Inc. All rights reserved
See section 2.2.2.1
*MUL
Modifies the multiplication factor (+ 8 characters)
Example :
*MUL1.00E+01 selects a multiplication factor of 10
*MUL10.00000 selects a multiplication factor of 10
USB only
*ADD
Modifies the offset factor (8 characters)
Example :
*OFF2.00E+02 selects a user offset of +200 watts
*OFF-200.000 selects a user offset of -200 watts
USB only
*ANE
Enable the anticipation (default)
See section 2.2.3.3.3
USB and
DB-15 connector
*AND
Disable the Anticipation
See section 2.2.3.3.3
USB and
DB-15 connector
*CVU
Stop the HP to send data automatically (push mode) and
returns a single measurement
Example :
*CVU
Pw= 0.0 Ti= 20.000 F= 0.000
USB only
Please note that
you must type the exact number of characters or numerical values required and don’t put
any space between characters or numerical values.