King Kooker Jet and Combination Burners - Manual (Page 9)

tools reQuIred:
torQue wrench or AdjustAble wrench, leAK testIng solutIon
1. Before assembling, check that all cooker components are included in the shipping carton. Identify
these cooker parts from the assembly drawing. Accessories may vary according to model. Check
the list of accessories on your cooker box. The following parts are considered essential and should
be included in your package regardless of model number (certified units only).
required parts lists:
cooker stand, heat plate, lp hose and regulator, thermometer(s)
If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the
hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your cooker.
c90pK / c90pKb / c90h/spK / c90sspK Assembly
If your package includes a heat plate to assemble (three flat metal plates), please follow the below
directions.
a. Locate the three separate plates. Lay the plates on a flat surface as shown in Figure 1 below.
If one of the plates has a cutout along the inner edge, this plate must be installed around the
adjustable baffle’s extension when following the steps below. (Some units have been
designed with larger center cutouts and the baffle extension cutout has been eliminated from
the design. Some models may not include an adjustable baffle.)
b. Place the rounded inner edge of one plate against the vertical jet pipe in center of cooker.
The plate will fit around the appliance leg using the cutouts provided on the plate. Repeat
procedure with the second plate. Align the bolt holes of the first and second plate and attach
with bolt, lock washer and nut. Repeat procedure with third plate. Tighten all bolts/nuts.
Reference below Figure 2 for picture of a proper heat plate assembly.
9
sectIon I
outdoor cooKer Assembly
the use And cAre mAnuAl must be reAd And understood
beFore usIng the ApplIAnce
Throughout this manual the words appliance, cooker, fryer/boiler, burner and stove will be
used interchangeably to refer to the King Kooker ® Outdoor Cooker.
Figure 1 Figure 2
Baffle Extension
Cutout
Leg
Cutouts
Bolt
Holes