Signal interface – Ransburg 9060 HV P.S. Electric Motor 80102-21X User Manual
Page 17
Advertising
9060 for No. 2 Process Handgun - Introduction
CP-13-03.2
12
SIGNAL INTERFACE
The 9060 Controller, when configured for use
with the No. 2 Process Handgun, requires only
one signal input for operation, the trigger signal.
The trigger signal input (J3-5) is controlled from
a signal output from the relay board. This
output is activated when the No. 2 Process
Handgun’s on-off switch is turn on.
Advertising