Ransburg 9060 HV P.S. Electric Motor 80102-21X - Manual (Page 35)

9060 for No. 2 Process Handgun - Maintenance
CP-13-03.2 30
smaller 3 pin connector is facing the left
side of the unit when installing.
8. Secure power supply 2PS to the alumi-
num housing using the (4) cover plate
standoffs.
9. Plug connectors 5PL and 6PL back into
power supply 2PS.
10. Attach the cover plate to the standoffs
using the (4) screws.
11. Secure the cabinet lid, plug the power
supply back in and reinstall the HV cable.