Spray head reassembly (continued) – Ransburg Evolver SE Robotic Atomizer A12455-XXXXXXXX User Manual
Page 49
Advertising
![background image](/manuals/348091/49/background.png)
AA-09-01.1 : Evolver SE
SPRAY HEAD REASSEMBLY (continued)
Step 11
Install the o-ring into the seal retainer.
This o-ring separates cylinder air and
atomization air.
• Apply a thin layer of petroleum jelly
to the o-ring
Step 12
Using the seal carrier tool, install the
seal retainer into the spray head:
• Torque to 30-35 lbs.-in. (3.4-4.0 Nm)
• If not properly torqued, the atomiza-
tion and fan air may equalize result-
ing in lack of fan control.
1
2
1
2
Advertising