Ransburg Evolver SE Robotic Atomizer A12455-XXXXXXXX - Manual (Page 59)

AA-09-01.1 : Evolver SE
SPRAY HEAD ASSEMBLY (installation)
1
2
1
2
3
Step 1
Apply dielectric grease into the laby-
rinth of the spray head.
Apply a thin layer dielectric grease on-
to the o-rings before installing the
spray head.
Step 2
Install the spray head onto the mount-
ing block and turn it (counter-
clockwise) into position.
Step 3
Tighten the spray head retainer:
• Use a 3/16" hex wrench
• Turn counter-clockwise to tighten
• Do not over-tighten