Spray head reassembly (continued) – Ransburg Evolver SE Robotic Atomizer A12455-XXXXXXXX User Manual
Page 52
Advertising
AA-09-01.1 : Evolver SE
SPRAY HEAD REASSEMBLY (continued)
Step 17
Loosely install the air valve adjustment
nut and jam nut onto the needle shaft:
• The air valve adjustment nut should
be approximately flush with the end
of the needle shaft
Step 18
Install the rear needle assembly into
the spray head.
1
2
• Needle Shaft Assembly: 79151-00
• Solvent Proof O-ring: 79001-01
Advertising