Ransburg AquaBlock2 A12148-XX - Manual (Page 9)

AquaBlock 2- Safety
4
AREA
Tells where hazards
may occur.
HAZARD
Tells what the hazard is.
SAFEGUARDS
Tells how to avoid the hazard.
Intended Use Using coating materials and/or
cleaning and flushing solvents
which fave flash points below
100°F (37.8°C) may cause a
fire hazard.
This system is intended for use with waterborne
coating formulations only.
Toxic Substances Certain material may be harm-
ful if inhaled, or if there is con-
tact with the skin.
Follow the requirements of the Material Safety Data
Sheet supplied by coating material manufacturer.
Adequate exhaust must be provided to keep the
air free of accumulations of toxic materials.
Use a mask or respirator whenever there is a chance
of inhaling sprayed materials. The mask must be
compatible with the material being sprayed and its
concentration. Equipment must be as prescribed
by an industrial hygienist or safety expert, and be
NIOSH approved.
LN-9902-00.3
Ransburg