Robinair 16900 Refrigerant Identifier - Manual (Page 10)

8
WARNING
Verify the wall power adapter AC inlet voltage is either 115 or
230 so it matches the AC power available.
Hardware Descriptions
POWER HARNESSES
1. Vehicle Battery Adapter: This is a 6-foot power cable that has
an instrument mating connector on one end and vehicle battery
connection clips on the other end. This harness is used to connect
power from the vehicle battery to operate the instrument and avoid
the use of extension cords.
2. Wall Power Adapter: This is a 6-foot power cable that has an
instrument mating connector on one end and a plug-in power
transformer on the other end. This harness is used to connect power
from a standard 120 wall power outlet to provide operating power
to the instrument.
R-134A TANK ADAPTER FITTING
1. This adapter provides a conversion of standard R-134a cylinder
ACME threaded ports to a R-134a low-side coupler stub. This
conversion permits the use of the instrument R-134a sample hose
during refrigerant cylinder sampling.
STORAGE CASE
1. The corrugated storage case houses the instrument and all
accessories, including sample hoses, adapter fitting, power
adapters, and the operating manual.