Securitron DKC - Manual (Page 11)

PN# 500-33510
Page 11 Rev. A, 06/13
When the green octagon appears, the DKC
Programming Tool is connected to the controller and
ready to communicate with the DKC.
Click on the picture of the green octagon to start the
programming the DKC.
Status: DKC ready for use
DKC Programming Tool Overview
The Securitron DKC Programming Tool allows easy programming from a computer using an
easy-to-use graphical interface. An event log displays detailed information to help
troubleshooting problems or errors.
When connecting the DKC to a computer all information stored in the DKC must be IMPORTED
into the Programming Tool. Once changes are made in the Programming Tool the information
must be EXPORTED to the DKC for the changes to be in effect.
About the Three Forms
The DKC Programming Tool interface is comprised of three Forms: the Status Form; the
Configuration Form; the Event Log Form.
The Status Form
The Status Form indicates the status of the DKC
Programming Tool and consists of:
 A visual status queue (a colored octagon )
 A status bar (at the bottom of the form), indicating
status of DKC Programming Tool
 Two pull-down menus: the Program menu and the
Help menu
To open the Configuration Form and begin programming
the DKC, click in the center of the green octagon. Status: DKC ready for use
The Configuration Form
The Configuration Form has six tabs: a database tab for each door, an option tab for each door,
an option relays tab and a customization and security tab. The Configuration Form contains five
menus, plus the online Help menu: Project, Edit, Import/Export, Real-Time Clock, and Event
Log.
Configuration Form Tabs
The Database Tabs
The Configuration Form contains two
database tabs; one for each door. Up to
250 codes can be recorded per database.
GREEN
GREEN