Auto-zero – SKC Limited EPAM-5000 User Manual
Page 31
Advertising
Auto-Zero
Introduction
Auto-Zero purging feature automatically adjusts for baseline drift due to
severe ambient temperature change.
This feature is a default setting on the EPAM-5000.
The Auto-Zero feature purges the sensor optics with clean air and re-
establishes the baseline every 30 minutes.
Auto-Zero
To deactivate or reactivate the Auto Zero purging feature follow the table
below.
Step Action
1
Select Special Functions from the Main Menu.
2
Select System Options.
3
Select Extended Options.
4
Select Calibration Options.
5
Select Auto Zero.
3 - 6
Advertising