SKC Limited EPAM-5000 - Manual (Page 52)

Translating Data to an ASCII Text File
Introduction Project Data must be translated into ASCII text format before it can be read
by a spreadsheet application.
Translating
data Follow the steps in the table below to Translate Project Data into ASCII Text
format.
Note: A Project Folder must be open to access the translate feature.
Step Action
1 Select File from the Main Menu.
2 Select Export.
3 An “Export Locations” Window will appear. Select either All for
all locations or select the range of locations you would like to
export. Click OK when you have selected your locations.
4 An “Export To…” Window will appear. Type in the name that
you would like to call your exported data and click Save.
6 When you are ready to open the data in a spreadsheet application.
Open the spreadsheet program go to the Open menu, select all
files under type of file name and double click on the file you want
to review. This will result in your saved data opening in your
spreadsheet program.
Figure 14. Exported Excel information.
4- 13