IAI America RCP2CR-SS8C - Manual (Page 61)

53
9. Maintenance and Inspection
[Procedure]
1) Remove the slider-cover affixing screws and remove the covers.
After the slider covers have been removed
[1] Standard specification (slider structure)
‡6$&6$& ‡6$&66&66&+6&
>@&OHDQURRPVSHFLILFDWLRQ 6OLGHUUROOHUVSecification (optional) (roller structure)
‡6$&6$&
‡6$&66&66&+6&
&DXWLRQ  5HPRYHWKHVOLGHUFRYHUVVORZO\DQGJHQWO\. If the actuator is installed on the ceiling or
RULHQWHGYHUWLFDOO\RUKRUL]RQWDOO\RQLWVVLde, place a plastic bag, etc., underneath the slider
FRYHUVVRDVQRWWRORVHWKHFRLOVSULQJVDQGVSDFHUVLQFDVHWKH\GURSRII
Sheet slider
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ
Spacer
Spacer
Roller
Roller
Sheet slider
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ
Roller
Roller
Sheet slider
Sheet slider
Plate spring
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ
&RLOVSULQJ