IAI America RCP2CR-SS8C - Manual (Page 77)

69
9. Maintenance and Inspection
6) Apply grease to the coupling on the actuator side.
Pilot alignment metal
If this metal is attached on the
decoupled motor, put it back to the
pilot on the actuator side.
.\RGR<XVKL¶V0XOWHPS/5/KDVEHHQ
applied before shipment.
 5HPRYHWKHPRWRU
䈄 5HPRYHWKHDIIL[LQJEROWV 0îSFV XVLQJDQ
$OOHQZUHQFKRIPPDFURVVIODWV
‡3XOORXWWKHPRWRUE\KDQG
‡'HFRXSOHGPRWRU
:DUQLQJ  1HYHUXVHDQ\IOXRULQHEDVHG
grease.It will chemically react with
OLWKLXPEDVHGJUHDVHDQGGDPDJHWKH
actuator.