IAI America RCP3-RA2BR - Manual (Page 49)

43
13. Maintenance and Inspection
13.6.2 How to Apply Grease
For the guide, use a grease syringe to apply grease between the rod and base (guide-piece retention
groove) and then move the rod back and forth to spread the grease evenly.
For the lead screw, pull out the rod and clean the lead screw, and apply grease manually and then move
the rod back and forth to spread the grease evenly.
(Caution) When moving the rod back and forth, do not move the rod directly by hand, but operate it using
the jog function, etc.
•
• In case the grease got into your eye, immediately go to see the doctor to get an appropriate care.
After finishing the grease supply work, wash your hands carefully with water and soap to rinse the
grease off.
Caution