IAI America RCLE-GR5L User Manual
Page 22
16
Note :
Ɣ
Some tapped holes for attachment are through holes. Do not attempt to use a long screw
with the length more than the effective screw length of the hole. Doing so may damage the
mechanical parts or electrical parts inside.
Ɣ The temperature of the unit gets very high in a continuous operation. To lessen the
temperature rise of the unit, install it on a material such as metal that possesses high heat
conductivity performance.
It may cause an extreme temperature rise on the unit, and may end up with a breakdown.
(Reference)
When operated with duty 50%, the temperature rises in approximately 40
qC at the unit
attachment surface (side surface) and finger attachment surfaces.
[Refer to 6.4 Temperature Rises on Main Body and Finger]