IAI America PCON-CY User Manual
Pcon-cy controller solenoid valve type
Advertising
Table of contents
Document Outline
- Please Read Before Use
- CAUTION
- CE Marking
- Table of Contents
- Safety Precautions
- 1. Overview
- 2. Specifications
- 3. Installation and Wiring
- 3.1 Installation Environment
- 3.2 Supplied Voltage
- 3.3 Noise Elimination Measures and Grounding
- 3.4 Heat Radiation and Installation
- 3.5 External Connection Diagram
- 3.6 Wiring the Power Supply
- 3.7 Wiring the Brake Forced-release Switch
- 3.8 Wiring the Emergency Stop Circuit
- 3.9 Connecting the Actuator
- 3.10 Connecting the I/O Flat Cable
- 3.11 Connecting the Communication Cable
- 4. Position Table Settings
- 5. Operation Using I/O Signals
- 6. Parameter Settings
- 7. Troubleshooting
- * Appendix
- List of Specifications of Connectable Actuators
- Correlation diagram of speed and load capacity for the slider type (motor-straight type)
- Correlation diagram of speed and load capacity for the slider type (motor-reversing type)
- Correlation diagram of speed and load capacity for the standard rod type
- Correlation diagram of speed and load capacity for the single-guide type
- Correlation diagram of speed and load capacity for the double-guide type
- Correlation diagram of speed and load capacity for the dustproof/splash-proof type
- Correlation diagram of speed and load capacity for the RCP3 slider type
- Correlation diagram of speed and load capacity for the RCP3 table type
- Push Force and Current-limiting Value
- Position Table Record
- Parameter Record
- Change History