IAI America IA-T-XD - Manual (Page 114)

To write the data in flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
The message “Please wait…” flashes during flash
ROM writing.
* Never turn off the power to the Controller at this
time.
After flash ROM writing, the screen changes to the
one for software reset.
To make the changed parameter valid, reset
software. Press the F1 (Yes) key.
The message “Please wait…” flashes during
software reset.
When software reset is completed, the screen
returns to the Mode Selection screen.
111