IAI America IA-T-XD User Manual
Page 138
Advertising
⑦ Encoder multi-rotation data reset (2)
Press the F1 (OK) key.
⑧ Home preset value auto refresh
Press the PAGE UP key and do not press the F1
(OK) key.
▪ Do not execute the item of “home preset value auto refresh.” (Be careful especially when
performing an absolute reset without a jig.)
▪ If “home preset value auto refresh” is executed without using an adjusting jig, the home position
becomes misaligned.
▪ If “home preset value auto refresh” is executed by mistake, perform an absolute reset work
again using an adjusting jig. (Up to the work steps of ⑧ above)
⑨
Remove the adjusting jig. Remove an
emergency stop reset adjusting jig if it is set.
After resetting the EMERGENCY STOP button,
press the F1 (OK) key.
135
Advertising
This manual is related to the following products: