IAI America IA-T-XD - Manual (Page 97)

Input of base coordinate values of Ⓐ
The cursor is located at the X-axis data.
Enter 475 and press the return key.
The cursor is located at the Y-axis data.
Enter -50 and press the return key.
The cursor is located at the Z-axis offset value data.
Enter 150 and press the return key.
The cursor is located at the R-axis offset value data.
Enter 0 and press the return key.
Press the F3 (Crd#) key to input the other position
data.
94